RS485 Wiring, Communication and Difference with RS232
The commonly used communication method for data acquisition and control is RS485. RS485 is a general communication standard. It can not only link devices to
analog to rs485 converter can be achieved between the sensor and the host signal acquisition, used to detect analog signals. Application in the 485 bus industrial automation and control systems, can monitor 4 ~ 20mA / 0 ~ 5V / 0 ~ 10V signal. Safe, reliable, beautiful appearance, easy installation.
analog to rs485 converter using the standard Modbus-RTU protocol, address, baud rate can be set by the host computer software that can be articulated in the 485 bus. Products according to industry-standard design, manufacture, with over-voltage protection, over-current protection, anti-interference ability, high reliability.
Power supply: DC 10~30V
Number of input channels: 1-way or 2-way optional
Acquire the Signal: 4-20ma/0-10v/0-5v
Protocol: MODBUS-RTU
Input resistance: 4-20ma ≤200 ohms,0-5v/0-10v≥10K ohms
Power consumption: 0.4w
Signal output: RS485
AD conversion resolution: 10-bit or 12-bit optional
Storage environment: -20℃~+60℃
Types | Logo | Description | Remarks |
---|---|---|---|
Power input and communication | VCC | Power input positive | 10~30V DC |
GND | Power input ground | ||
485A | 485-A | Communication | |
485B | 485-B | ||
Power output and signal input | VCC | Power output positive | Power output, module to equipment |
GND | Power output ground | ||
IN0 | Analog 1 input | Common for two-wire, three-wire, and four-wire system | |
IN1 | Analog 2 input |
The conversion module only needs one end of the power supply to be able to work normally, and the other end of the power supply is prepared for the subsequent stage power supply. If the latter stage is not powered, it can be left floating.
When multiple 485 models are connected to the same bus, there are certain requirements for on-site wiring, please contact us for details.
Wire system | VCC | GND | IN0 | IN1 |
---|---|---|---|---|
Two-wire system | Device power is positive | Air | Analog input 1 | Analog input 2 |
Three-wire system | Equipment power ground | Analog input 1 | Analog input 2 | |
Four-wire system | Equipment power ground analog input negative | Analog input 1 positive | Analog input 2 positive |
The commonly used communication method for data acquisition and control is RS485. RS485 is a general communication standard. It can not only link devices to
Table of Contents Smart buildings are the product of the development of modern science. The smart building system is mainly composed of Internet of Things
The key to the smart industry lies in the collection of data and information. Sensors are the nerve endings of the smart industry. They are
Carbon dioxide is one of the standards for measuring indoor air quality, but unlike other pollutants, carbon dioxide has no color or smell, and carbon
A greenhouse is a closed environment that provides optimal conditions for plant growth and promotes plant growth by controlling indoor and outdoor environments. A complete
Table of Contents Modern companies are placing an increasing emphasis on the value of collected data. As a result, central data centers, IDCs, and similar
Have you or your friend experienced a broken water pipe, water accumulation in the kitchen or bathroom? Water is the most common cause of property
When you are on a business trip or out of town, the ability to monitor the temperature and humidity of your home, warehouse, or cold
What is an air quality monitor? An instrument used to detect air quality can be called an air quality monitor. However, due to the extensive
Table of Contents What is an anemometer? An anemometer is an instrument that measures the velocity of air, sometimes called a wind sensor. The earliest